XCLEANR
PREWASH - Alkaline Foaming Prewash
Couldn't load pickup availability
Give dirt a head start. Off your car.
Your wash starts before the mitt touches the paint. XCLEANR PREWASH uses alkaline foaming action to loosen dirt and road grime, helping you rinse away contamination before contact washing.
Apply the foam, allow it to work for up to five minutes without drying, then rinse thoroughly. Follow with SOAP for your contact wash.
✓ Loosens dirt before contact washing
✓ Alkaline cleaning formula
✓ Foaming application
✓ Up to five minutes of dwell time
✓ The first step before SOAP
500 mL / 16.9 US fl oz
Dilute before use
Light dirt : 1:20
Mix 50 mL of PREWASH (5 capfuls) with 1 L of water.
Heavy dirt : 1:10
Mix 100 mL of PREWASH (10 capfuls) with 1 L of water.
Each capful measures 10 mL. Ratios are product to water.
Shipping & Returns
Row content
Compatibility
Designed for exterior vehicle prewashing with a foam cannon. Dilute 1:20 for light dirt or 1:10 for heavy dirt.
Apply to cool surfaces out of direct sunlight. Allow up to five minutes of dwell time, never let the product dry, and rinse thoroughly.
For PPF, vinyl wraps, matte finishes or existing protective coatings, confirm compatibility with their manufacturer before use.
Foam first. Mitt later.
Let the foam do the first round.
Loosen dirt, rinse it away and give your contact wash a cleaner starting point.
Loosen the daily grime.
The alkaline formula helps break down accumulated dirt and road grime before you begin washing by hand.
Give the foam time to work.
Allow up to five minutes of dwell time while watching the surface. Rinse sooner if the foam starts to dry.
A better start for your mitt.
Rinse away loosened dirt before contact washing. PREWASH handles the first round so your wash mitt has less contamination to deal with.
LET DUKX SHOW YOU HOW.
Before you grab the mitt, let DUKX show you how to give dirt its first eviction notice.
SMALL DETAILS. BETTER RESULTS.
A good prewash starts with the right conditions and ends with a thorough rinse.
⓵ Keep it cool.
Work on cool surfaces and out of direct sunlight. Give the foam a chance to work without drying too quickly.
⓶ Five minutes is the limit.
Allow the foam to dwell for up to five minutes, never until it dries. Warm or windy conditions may mean rinsing sooner.
⓷ The Mitt is for SOAP
Rinse away the foam and loosened dirt thoroughly. Then begin your contact wash with SOAP and a clean wash mitt.
PREWASH, EXPLAINED.
What to do before the mitt comes out.
What does PREWASH do?
PREWASH is an alkaline foaming cleaner that loosens dirt and road grime before contact washing. It helps you rinse away contamination before using your wash mitt.
What’s the difference between PREWASH and SOAP?
PREWASH is the first step: apply foam, let it work and rinse away loosened dirt.
SOAP is your neutral contact-wash shampoo, used afterward with a wash mitt. They handle different stages of the same wash.
Does PREWASH replace washing by hand?
Not necessarily. PREWASH removes loosened contamination during rinsing, but remaining dirt may still need a contact wash. Follow with SOAP for a thorough clean.
How long should I leave the foam on?
Allow up to five minutes. Never let it dry on the vehicle, and rinse sooner if drying begins. You don’t need to wait the full five minutes in every condition.
Should I scrub while the foam is on?
For the prewash step, let the foam work and rinse thoroughly. Save your wash mitt for the contact wash with SOAP afterward.
Can I apply it to a hot vehicle or in direct sunlight?
Work on a cool vehicle in the shade. Heat and direct sunlight can dry the foam too quickly. Keep your rinse water ready and monitor the surface throughout the application.
Where can I find application and safety information?
Read the product label before use and keep out of reach of children. For complete safety, handling, storage and first-aid information, consult the PREWASH Safety Data Sheet.
COMPLETE THE ROUTINE.
Take your wash one step further with these XCLEANR essentials.
