XCLEANR
SOAP - Neutral Wash Shampoo
Couldn't load pickup availability
Make wash day the good part.
Rich foam. A slick glide. A wash worth taking your time for.
XCLEANR SOAP pairs a neutral formula with excellent lubrication to help your wash mitt glide smoothly as you clean. It’s the contact-wash step that turns a dirty vehicle into a satisfying weekend ritual.
Add three capfuls to 10 L of water, wash with a clean mitt, then rinse thoroughly and dry.
✓ Neutral wash formula
✓ Rich foam
✓ Excellent lubrication
✓ Smooth wash-mitt glide
✓ Just three capfuls per 10 L of water
500 mL / 16.9 US fl oz
Shipping & Returns
Row content
Compatibility
Designed for exterior vehicle washing with a wash mitt and bucket. Dilute three capfuls in 10 L of water.
Work on cool surfaces, rinse thoroughly and avoid letting the wash solution dry. For specialty finishes, wraps, films or protective coatings, follow their manufacturer’s washing recommendations.
Less drag. More glide. Happy duck.
Give your mitt a smoother ride.
Rich foam, excellent lubrication and a neutral formula come together for a satisfying contact wash.
Bring on the bubbles.
Rich foam makes every pass part of the wash-day experience. Work with a clean mitt, then rinse thoroughly.
Let your mitt glide.
Excellent lubrication helps your wash mitt move smoothly across the surface. Use gentle pressure and rinse your mitt regularly as you work.
Three capfuls. One bucket.
Add three capfuls to 10 L of water for your contact wash. A simple dose that keeps your routine easy to repeat.
LET DUKX SHOW YOU HOW.
Grab your bucket and a clean mitt. DUKX is about to make wash day a little more satisfying.
SMALL DETAILS. BETTER RESULTS.
Your wash technique matters just as much as what’s in your bucket.
⓵ Start at the top.
Wash the upper panels first and leave the dirtier lower areas for last. Work in manageable sections with gentle pressure.
⓶ Give dirt its own bucket.
Rinse your mitt in a separate bucket of clean water before returning to your SOAP solution. Refresh the rinse water when it gets dirty.
⓷ A dropped mitt takes a break.
If your mitt hits the ground, swap it for a clean one. Don’t bring trapped grit back onto your paint.
SOAP, EXPLAINED.
The essentials for your next bucket wash.
How much SOAP should I use?
Add three capfuls of SOAP to 10 L of water. Mix the solution before washing with a clean wash mitt.
What’s the difference between SOAP and PREWASH?
PREWASH is an alkaline foaming cleaner that loosens dirt before contact washing.
SOAP is a neutral wash shampoo used with a mitt and bucket to clean the vehicle by hand. Use PREWASH first when needed, rinse thoroughly, then continue with SOAP.
Do I still need a wash mitt?
Yes. SOAP is designed for contact washing. Its lubricating formula helps your mitt glide while you clean. Use gentle pressure and rinse the mitt regularly.
Does the lubrication prevent scratches?
Lubrication helps your mitt glide, but good technique still matters. Remove loose dirt before washing, keep your mitt clean and avoid excessive pressure. No shampoo makes dirty tools safe for paint.
Can I wash in direct sunlight?
For best results, work in the shade on cool surfaces. Wash manageable sections and rinse before the soap dries.
Can I use WETCOAT after SOAP?
Yes. Rinse SOAP away thoroughly and leave the vehicle wet. Apply WETCOAT one panel at a time, rinse each panel immediately, then dry the vehicle.
Where can I find application and safety information?
Read the product label for approved surfaces, application timing and precautions. For complete safety, handling, storage and first-aid information, consult the SOAP Safety Data Sheet.
COMPLETE THE ROUTINE.
Take your wash one step further with these XCLEANR essentials.
