XCLEANR
WETCOAT - Spray & Rinse Protection
Couldn't load pickup availability
Your next rinse comes with protection.
Turn the final stage of your wash into a protective finishing step. XCLEANR WETCOAT adds shine, water beading and up to three months of protection with a simple spray-and-rinse application.
Apply to a clean, wet surface and rinse immediately, one panel at a time. Once you’re done, dry the vehicle and enjoy the finish.
✓ Protection for up to three months
✓ Hydrophobic water beading
✓ Enhances shine
✓ Spray on, rinse off
✓ No separate buffing step
500 mL / 16.9 US fl oz
Shipping & Returns
Row content
Compatibility
Designed for exterior automotive glass. Apply to a clean, dry surface.
For specialty glass coatings or films applied to the outside of the glass, confirm compatibility with their manufacturer before application.
Like water off a duck’s back. Now on your car.
Your final rinse count.
Discover the shine, water beading and protection behind one seriously satisfying finishing step.
Watch the water bead.
WETCOAT leaves a hydrophobic finish that makes water bead on the treated surface. Your next rinse just got a lot more satisfying.
Protection that stays after the rinse.
Enjoy up to three months of protection. Actual durability varies with driving conditions, weather and your washing routine.
Spray. Rinse. Done.
Apply to a clean, wet panel and rinse immediately before moving to the next. Finish by drying the vehicle no separate buffing step needed.
LET DUKX SHOW YOU HOW.
A few simple steps. A whole lot of beading. DUKX has your final rinse covered.
SMALL DETAILS. BETTER RESULTS.
The trick is simple: keep it wet, keep it moving and rinse right away.
⓵ Clean first. Keep it wet.
Wash and rinse the vehicle before applying WETCOAT. The surface should be clean and still wet when you start.
⓶ One panel at a time.
Spray one panel and rinse immediately before treating the next. Keep your water source ready and never let the product dry on the surface.
⓷ Finish with a proper dry.
After treating and thoroughly rinsing every panel, dry the vehicle with a clean drying towel or a suitable vehicle dryer. Don’t leave the remaining water to dry on its own.
WETCOAT, EXPLAINED.
Everything you need to turn your next rinse into a protection step.
What does WETCOAT do?
WETCOAT adds shine, hydrophobic water beading and up to three months of protection. It’s applied after washing, while the vehicle is still wet, and rinsed off immediately.
How long does the protection last?
Up to three months. Durability varies with weather, driving conditions, surface preparation and how the vehicle is washed.
Should I apply it to a wet or dry vehicle?
Wet. Wash and rinse first, then apply WETCOAT while the surface is still wet. Treat one panel at a time and rinse immediately.
How long should I leave it on before rinsing?
Rinse immediately after spraying each panel. There is no waiting period. Don’t apply it to the entire vehicle before rinsing, and never allow the product to dry on the surface.
Do I need to spread or buff it with a microfiber?
No spreading or buffing is required during application. Spray onto the clean, wet surface and rinse thoroughly. Once the vehicle is fully treated and rinsed, dry it as usual.
What’s the difference between WETCOAT and QUACKSHINE?
WETCOAT is a spray-and-rinse protection step applied to a wet vehicle after washing.
QUACKSHINE is a wipe-and-buff quick detail spray for light dust, shine touch-ups and a slick finish.
Choose WETCOAT for protection during your wash, or QUACKSHINE for quick finishing touches between washes.
Where can I find application and safety information?
Read the product label for approved surfaces, application timing and precautions. For complete safety, handling, storage and first-aid information, consult the WETCOAT Safety Data Sheet.
COMPLETE THE ROUTINE.
Take your wash one step further with these XCLEANR essentials.
